- 100-sheet RSPF*1 and stackless duplex module
- A3 full-colour scanning with convenient scan utility software
- Direct scanning to USB memory
- Network TWAIN function allows remote scanning from networked PCs
- Powerful network printing with PCL 6 emulation*1 and PostScript® 3™ emulation*1
- 10Base-T/100Base-TX interface
- ID Card Copy function enables easy copying of both sides of a card onto a single page
- Red and green LED lamps light up to notify users of machine/job status
*1 Optional
| General | Engine Speed (ppm) | A4 (8 1/2” x 11″)*1 |
31 |
|---|---|---|---|
| A3 (11″ x 17″) | 17 | ||
| Min./Max. Paper Size | A6*2 – A3 (5 1/2” x 8 1/2” – 11″ x 17″) |
||
| Std./Max. Paper Capacity (sheets) | 1,100 / 2,100 | ||
| Paper Weight (g/m2) | 55-200 (13 lbs bond – 110 lbs index) |
||
| Warm-up Time (sec.)*4 | 20 | ||
| Std./Max. Memory | 320MB / 448MB | ||
| Hard Disk*5 | – | ||
| Max. Power Consumption (kW) | 1.45 | ||
| Dimensions (W x D x H) | 599 x 612 x 611 mm (23 19/32” x 24 7/64” x 24 1/16“)*13 |
||
| Weight (approx.) | 37 kg (81.6 lbs)*13 | ||
| Control Panel Display | Custom LCD | ||
| Document Feeder | 100-sheets RSPF*7 | ||
| Finishing | Duplex | Std. | |
| Offset Stacking | – | ||
| Stapling | – | ||
| Punching | – | ||
| Saddle Stitching | – | ||
| Multi-Folding | – | ||
| Trimming | – | ||
| Copier | Max. Original Paper Size | A3 (11″ x 17″) | |
| First Copy Time (sec.)*6 | Colour | – | |
| B/W | 5.2 | ||
| Max. Scan Resolution (dpi) | Colour | – | |
| B/W | 400 x 600 | ||
| Max. Print Resolution (dpi) | Colour | – | |
| B/W | 600 x 600 | ||
| Zoom Range (%) | 25 – 400 (50 – 200 using RSPF) |
||
| Network Printer | Max. Resolution (dpi) | 600 x 600 | |
| Std./Opt. PDL | SPLC / PCL 6, PostScript 3 | ||
| Std./Opt. Interface | USB 2.0, 10Base-T, 100Base-TX / – | ||
| Network Colour Scanner | Max. Scanning Speed (opm) | 1-sided | – |
| 2-sided | (Colour: 1.27 msec/line; B/W: 0.423 msec/line) | ||
| Max. Resolution (dpi) | 600 | ||
| File Formats | TIFF, PDF, JPEG*8 | ||
| Scan Destinations | USB memory | ||
| Fax / Internet Fax | – / – | ||
| Document Filing | Max. Capacity (total pages/files)*9 | – | |
*1: Long-edge feeding
*2: Short-edge feeding only.
*3. Paper thicker than 220 g/m2 must be fed through multi-bypass tray.
*4: At rated voltage, 23°C (73.4°F). May vary depending on operating conditions and environment.
*5: HDD capacity depends on procurement and sourcing status.
*6: Best achieved time based on A4 (8 1/2” x 11 “) copying, long-edge feeding, MFP in fully ready condition. May vary depending on operating conditions and environment.
*7: Optional
*8: Colour only
*9: Storage capacity will vary depending on the type of document and the scan settings.
*10: As print performance may decrease depending on the type of data, Sharp recommends installing the optional Productivity Kit for optimal MFP performance.
*11: 51 cpm/ppm for MX-M565N/M564N when equipped with MX-FN10 saddle stitch finisher.
*12: Depending on usage conditions and type of paper, printing may not be executed correctly.
*13: Including document cover.
*14: Including adjusters and protuberances.
*15: Can be used with Button Manager only.
*16: Not available when MFP is equipped with Network Expansion Kit.
*17: Auto Start mode allows the user to go to reserved copy by pushing the start key while the MFP is turning on after being off or recovering from energy-saving mode. Copying starts automatically once the MFP has turned on.
*18: Best achieved time based on A4 (8 1/2” x 11″) copying, short-edge feeding, MFP in fully ready condition. May vary depending on operating conditions and environment.
*2: Short-edge feeding only.
*3. Paper thicker than 220 g/m2 must be fed through multi-bypass tray.
*4: At rated voltage, 23°C (73.4°F). May vary depending on operating conditions and environment.
*5: HDD capacity depends on procurement and sourcing status.
*6: Best achieved time based on A4 (8 1/2” x 11 “) copying, long-edge feeding, MFP in fully ready condition. May vary depending on operating conditions and environment.
*7: Optional
*8: Colour only
*9: Storage capacity will vary depending on the type of document and the scan settings.
*10: As print performance may decrease depending on the type of data, Sharp recommends installing the optional Productivity Kit for optimal MFP performance.
*11: 51 cpm/ppm for MX-M565N/M564N when equipped with MX-FN10 saddle stitch finisher.
*12: Depending on usage conditions and type of paper, printing may not be executed correctly.
*13: Including document cover.
*14: Including adjusters and protuberances.
*15: Can be used with Button Manager only.
*16: Not available when MFP is equipped with Network Expansion Kit.
*17: Auto Start mode allows the user to go to reserved copy by pushing the start key while the MFP is turning on after being off or recovering from energy-saving mode. Copying starts automatically once the MFP has turned on.
*18: Best achieved time based on A4 (8 1/2” x 11″) copying, short-edge feeding, MFP in fully ready condition. May vary depending on operating conditions and environment.
